Pre-lacquered water-slide decal paper that is suitable also for higher temperature ranges, e.g. inglaze temperatures. CoverCal can be printed on directly. No additional varnishing is required.
As an unfluxed paper type, it is suitable for use with our prefluxed toners. There is no visible flux edge.
We recommend this for use on flat and regular object shapes.
CoverCal is available in the following paper formats:
| Flux | Unfluxed |
|---|---|
| Material | Ceramic, Enamel, Porcelain |
| Procedure | Direct printing |
| Paper size | A3, A4 |
Suitable for high-temperature decals over 1000 °C, printed with our inglaze toner set. Laminate papers are recommended only for flat and regular shapes.
Liquid cover coat without flux suitable for ceramic decoration without flux edges, e.g. logo decals or text. You can use the varnish without flux on all object shapes.
The lead-free fluxed laminate paper is particularly suitable for use in combination with our also lead-free toner sets.
Our yellow laminate paper with standard flux is suitable for firing temperatures up to 900 °C. The laminate paper is suitable only for application on flat surfaces.
This liquid cover coat contains lead-free flux and is therefore suitable for use with all our lead-free ceramic toner sets. It can be used for all object shapes, in particular in the tableware industry.
Yellow liquid cover coat with standard flux, suitable for applications at a firing temperature of up to 900 °C. Can be used on all object shapes.
For coating your high-temperature decals above 1,000 °C. Best possible combination with the red unfluxed toner set for high-temperature ranges.
Our clear laminate paper is unfluxed and therefore suitable for applications without flux edges, e.g. logo prints or text.